FLASHFORGE ADVENTURER 5M ENCLOSURE - Mini Top

In stock · Made-to-order resin · Ships from Auckland · Free shipping over $75

Material

PLA (filament)

Colour

Grey

Weight

~40 g

Print time

~4.5 h

Shipping

$10 std · $20 express

Lead time

1-3 d print + 1-4 d ship

Smaller top for the FlashForge 5M Adventure 3D Printer. I always thought the “stock” top on the printed enclosure to be a bit too big… I made mine ½ the size… and still fit everything. I also made a smaller Drag Chain extruder end… to sit lower. Hope you like it! The connectors are built in. I recommend printing at an angle with tree supports in PETG. I provided the all-in-one file if you want to slice them up yourself with pegs instead.. or into different sizes. I recommend scuffing the ends before superglueing them. --------------------------------------------------------------------------------------------------------------- If this was helpful, please consider a donation for my work on this project. Thank you! PayPal Tip Jar: https://paypal.me/neofactor --------------------------------------------------------------------------------------------------------------- UPDATE: June 13, 2024 I made a new face plate… this one doesn't use magnets and extended the right sight slightly because of a small gap with the side rail…. It fits very well now with just some double-sided sticky tape. I also changed the lettering slightly to have it print better… not as deep so no supports get prompted. UPDATE: May 20, 2024 Display Lock: This is obviously a work in progress. I had a few things to improve. The display mount… I noticed the display can be knocked to the right and even knocked off the mount if hit… so I…. I made a Display Lock. The lock was made to fit AFTER the fact, so you need to drill a hole into the top… Drill a hole using the latch as a guide: Put in a small M3 Brass Insert: I used an M3*8 screw It holds it fine… and leaves room for USB if needed. NOTE: I also used a modified drag chain mount…It has no overhead spool mount… It is NOT needed… but that is what I used. This mount uses cut-down version of the drag chain mount: https://www.printables.com/model/805627-flashforge-adventurer-5m-drag-chain-ad5m I also was inspired by Doug's Hot end mount: https://www.printables.com/model/785667-flashforge-adventurer-5m-ad5m-simpler-easier-faste/remixes But I made my OWN version which rides lower to allow for a better position of the chain to not hit the lid… https://www.printables.com/model/858904-flashforge-adventurer-5m-ad5m-drag-chain-terminati